Hi Hoppy,Hi Dio.
Could you please dumb it down a touch for me.
As far as a product goes do you see it as something that will be primarily used by enterprise grade operations such as data centres which would, I assume, have limited numbers, but would also be quite lucratively priced?
Is it likely that a product in a usb raspberry pi form factor that could be relatively cheaply produced in large quantities would be made available for purchase by the likes of me as a commercial personal cybersecurity device I could attach to my laptop/ desk computer?
As you say, I pay an annual subscription for software based security for my systems but would dearly like to supplement/ enhance my protection with something Akida based.
I agree, in that I see that as a potentially huge market for BrainChip to tap.
Indeed, possibly a Company making market.
Or am I just dreaming in this regard.
Thanks in advance.
Bloody hell! Now you've made me think about the practicalities of adopting M2.
The M2 is a miniature PCB designed to fit into an internal slot on any device equipped with the appropriate slot, so the initial market is limited to devices with a vacant M2 slot.
The M2 literature mentions gateways, ie, your internet connection box, and anything larger such as the edge box. It would also be useful in enterprise servers.
I would like to see a USB version (belt and braces, me, when it comes to cybresecurity), but I suppose their thinking is that any PC/laptop connected to the internet would be via a WiFi gateway. Still, roaming is a problem as you don't know where it's been, so I'd like to see the M2 in any connected device I used. Trojans like key stroke loggers are a particular concern for online banking.
Someone mentioned that USB would be slower than M2, and that may be of concern for gamers, but I don't think it would be such a problem for real people.
Longer term, it is possible that phone makers and PC makers will incorporate M2 into their product design.
I'm not familiar with Raspberry Pi, but their site talks about an M2 Adaptor:
https://www.raspberrypi.com/products/m2-hat-plus/
Raspberry Pi M.2 HAT+
The Raspberry Pi M.2 HAT+ enables you to connect M.2 peripherals such as NVMe drives and AI accelerators to Raspberry Pi 5’s PCIe 2.0 interface, supporting fast (up to 500 MB/s) data transfer to and from NVMe drives and other PCIe accessories.Raspberry Pi 5’s single-lane PCI Express 2.0 interface is exposed on a 16-pin, 0.5mm- pitch FPC connector; the M.2 HAT+ M Key is a mechanical adapter board that converts between this connector and a subset of the M.2 standard. It supports devices that have the M.2 M key edge connector, in the 2230 and 2242 form factors. It is capable of supplying up to 3A to connected M.2 devices.
The Raspberry Pi M.2 HAT+ conforms to the Raspberry Pi HAT+ specification and is autodetected by the latest Raspberry Pi software/firmware. It is supplied with a 16mm stacking header and threaded spacers, so it can be fitted to a Raspberry Pi 5 with the Raspberry Pi Active Cooler in place.
Last edited: