BRN Discussion Ongoing
- Thread starter TechGirl
- Start date
I’m looking for a bombshell announcement today. The timing would be impeccable.
GrandRhino
Founding Member
Greeeeen babbyyy is here!Is this his first appearance?
Greeeeen babbyyy is here!
He did a bloody great job on the Wall Street interview.
buena suerte :-)
BOB Bank of Brainchip
PleeeeeeaaseThanks FF. Appreciate it. Plus Akida has learning on chip also which other chip doesn’t have of course. Cheers
wilzy123
Founding Member
I think soGreeeeen babbyyy is here!
thelittleshort
Top Bloke
Oh wow I always thought that was a turtle til it was enlargedGreeeeen babbyyy is here!
Dhm
Regular
I just listened to this a few times. I thought the Bloke commenting had a degree of arrogance (at the proposition) as well of ignorance of the ability of Akita.
Fact Finder
Top 20
I suppose we all have bottom lines below which we will never go. I have been uncomfortable with neuralink and Elon Musk experiments on animals but the latest news regarding the deaths of chimpanzees is just too much.
A brief Google will highlight how for at least three decades mainstream medical scientists have been opposed to Chimpanzee research except in the most extreme cases of need where no other alternative exists.
The brutality he has been prepared to inflict on primates fits with his failure to front up for a flight in space. He is a throughly unpleasant little person with a very poor moral compass and I pray Brainchip and Mercedes send him back to obscurity.
My opinion only DYOR
FF
AKIDA BALLISTA
A brief Google will highlight how for at least three decades mainstream medical scientists have been opposed to Chimpanzee research except in the most extreme cases of need where no other alternative exists.
The brutality he has been prepared to inflict on primates fits with his failure to front up for a flight in space. He is a throughly unpleasant little person with a very poor moral compass and I pray Brainchip and Mercedes send him back to obscurity.
My opinion only DYOR
FF
AKIDA BALLISTA
Deena
Regular
I would hate to be waiting at a road rail crossing for the 7.29km train to go past.
Fact Finder
Top 20
I think from the little I have seen of the new CEO Sean Hehir he does not like brick walls. In his first solo interview he referred to Mercedes as a CUSTOMER of Brainchip.
In his next solo outing he made the point strongly he was not allowed to talk about Mercedes.
While you are absolutely 100% correct as to the legal constraints imposed on him by the ASX I think if he sees a brick wall built in what he considers to be the wrong place and to accomplish his mission it needs to be ignored he will do so just like the use of the word CUSTOMER.
So I personally would never rule out anything until after he has finished presenting. (WITH WELL NORTH OF 100 NDA’S HE HAS PLENTY OF MATERIAL TO CHOOSE FROM.)
My opinion only DYOR
FF
AKIDA BALLISTA
Fact Finder
Top 20
Have you got a link to Greenbaby doing the interview as I cannot find it. Has to be a must see. LOL FF
Fact Finder
Top 20
Have we nicknamed the CEO Sean Hehir Greenbaby because of his Irish roots? FF
Eirexpat
Member
I must say I am a bit curious with so much going on, why we havent had much announcements of recent. Seems like everyone else is pumping them out some small penny stocks and not all ground shaking news of course, however one would calculate that their silo of info is filling weekly. Surely something due any day now......come on BRN, the "enter" button, yes that one, is just on your right!!
We need an ANN now, today would be great timing!!
We need an ANN now, today would be great timing!!
Fullmoonfever
Top 20
Well written article from the VP of GTI on GSA Global.
www.gsaglobal.org
Large numbers of sensors, massive amounts of data, ever-increasing computing power, real-time operation and security concerns required for autonomous vehicles are driving the core of computation from the cloud to the edge of the network. Autonomous vehicles are constantly sensing and sending data on road conditions, location and the surrounding vehicles. Self-driving cars generate roughly 1 GB of data per second – it is impractical to send even a fraction of the terabytes of data for analysis to a centralized server because of the processing bandwidth and latency.
Due to the high volume of data transfer, latency issues and security, the current cloud computing service architecture hinders the vision of providing real-time artificial intelligence processing for driverless cars. Thus, deep learning, as the main representative of artificial intelligence, can be integrated into edge computing frameworks. Edge AI computing addresses latency-sensitive monitoring such as object tracking and detection, location-awareness, as well as privacy protection challenges faced in the cloud computing paradigm.
The real value of edge AI computing can only be realized if the collected data can be processed locally and decisions and predictions can be made in real-time with no reliance on remote resources. This can only happen if the edge computing platforms can host pre-trained deep learning models and have the computational resources to perform real-time inferencing locally. Latency and locality are key factors at the edge since data transport latencies and upstream service interruptions are intolerable and raise safety concerns (ISO26262) for driverless cars. As an example, the camera sensors on a vehicle should be able to detect and recognize its surrounding environment without relying on computational resources in the cloud within 3ms and with high reliability (99.9999%). For a vehicle with 120 km/h speed, 1ms round-trip latency corresponds to 3 cm between a vehicle and a static object or 6 cm between two moving vehicles.
Currently, most existing onboard AI computing tasks for autonomous vehicle applications including object detection, segmentation, road surface tracking, sign and signal recognition are mainly relying on general-purpose hardware – CPUs, GPUs, FPGAs or generic processors. However, power consumption, speed, accuracy, memory footprint, die size and BOM cost should all be taken into consideration for autonomous driving and embedded applications. High power consumption of GPUs magnified by the cooling load to meet the thermal constraints, can significantly degrade the driving range and fuel efficiency of the vehicle. Fancy packaging, fan-cooling, and general-purpose implementations have to go. Therefore, there is a need for cheaper, more power-efficient, and optimized AI accelerator chips such as domain-specific AI-based inference ASIC as a practical solution for accelerating deep learning inferences at the edge.
Advantages of Edge computing for AI automotive
Significant efforts have been recently spent on improving vehicle safety and efficiency. Advances in vehicular communication and 5G vehicle to everything (V2X) can now provide reliable communication links between vehicles and infrastructure networks (V2I). Edge computing is most suitable for bandwidth-intensive and latency-sensitive applications such as driverless cars where immediate action and reaction are required for safety reasons.
Autonomous driving systems are extremely complex; they tightly integrate many technologies, including sensing, localization, perception, decision making, as well as the smooth interactions with cloud platforms for high-definition (HD) map generation and data storage. These complexities impose numerous challenges for the design of autonomous driving edge computing systems.
Vehicular edge computing (VEC) systems need to process an enormous amount of data in real time. Since VEC systems are mobile, they often have very strict energy consumption restrictions. Thus, it is imperative to deliver sufficient computing power with reasonable energy consumption, to guarantee the safety of autonomous vehicles, even at high speed.
The overarching challenge of designing an edge computing ecosystem for autonomous vehicles is to deliver real-time processing, enough computing power, reliability, scalability, cost and security to ensure the safety and quality of the user experience of the autonomous vehicles.
Low Latency
Zero (low) latency for automotive safety is a must. Many of the self-driving car makers are envisioning that sensor data will flow up into the cloud for further data processing, deep learning, training and analysis required for their self-driving cars. This allows automakers to collect tons of driving data and be able to use machine learning to improve AIself-driving practices and learning. Estimates suggest that sending data back-and-forth across a network would take at least 150-200ms. This is a huge amount of time, given that the car is in motion and that real-time decisions need to be made about the control of the car.
According to Toyota, the amount of data transmitted between cars and the cloud could reach 10 exabytes a month by 2025. That’s 10,000 times the current amount. The cloud wasn’t designed to process massive amounts of data quickly enough for autonomous cars.
The self-driving car will be doing time-sensitive processing tasks such as lane tracking, traffic monitoring, object detection or semantic segmentation at the local (edge) level in real-time and taking driving actions accordingly. Meanwhile for longer-term tasks, it is sending the sensor data up to the cloud for data processing and eventually sending the analysis result back down to the self-driving car.
Edge computing technology will thus provide an end-to-end system architecture framework used to distribute computation processes to localized networks. A well-designed AI self-driving and connected car will be a collaborative edge-cloud computing system, efficient video/image processing, and multi-layer distributed (5G) network – a mixture of localized and cloud processing. Edge AI computing is meant to complement the cloud, not completely replace it.
Speed
Given the massive volume of data transmitting back-and-forth over a network, for safety reasons, much of the processing has to occur onboard the vehicle. The speed at which the vehicle needs to compute continuous data, without the need to transfer data, will help reduce latency and increase accuracy due to a reliance on connectivity and data transfer speeds.
The interdependency between humans and machines means the velocity of information transfer in real-time is essential. Using edge AI computing involves having enough localized computational processing and memory capacities to be able to ensure that the self-driving car and the AI processor can perform their needed tasks.
Reliability
The safety of autonomous cars is critical. Edge computing reduces the strain on clogged cloud networks and provides better reliability by reducing the lag between data processing and the vehicle. It didn’t take long for autonomous vehicle manufacturers to realize the limitations of the cloud. While the cloud is a necessity, autonomous cars require a more decentralized approach.
With edge computing and edge data centers positioned closer to vehicles, there is less chance of a network problem in a distant location affecting the local vehicles. Even in the event of a nearby data center outage, onboard intelligent edge inferencing of autonomous vehicles will continue to operate effectively on their own because they handle vital processing functions natively.
Today, automakers provide multiple layers of protection and redundancy for power failure, network failure and even compute failure. Vehicles also have the ability to dynamically re-route and power network traffic and even decision-making to bring an autonomous car to a safe stop. Driverless cars with edge AI computing can support onboard diagnostics with predictive analytics, a system that can grow and evolve in features over its lifecycle.
With so many edge computing vehicles connected to the network, data can be rerouted through multiple pathways to ensure vehicles retain access to the information they need. Effectively incorporating Internet of Vehicles (IoV) and edge computing into a comprehensive distributed edge architecture providing unparalleled reliability and availability.
Security
The ultimate challenge of designing an edge computing ecosystem for autonomous vehicles is to deliver enough computing power, redundancy, and security to guarantee the safety of autonomous vehicles. Thus, protecting autonomous driving
edge computing systems against attacks at different layers of the sensing and computing stack is of paramount concern.
Security of autonomous vehicles should cover different layers of the autonomous driving edge computing stack. These securities include sensor security, operating system security, control system security, and communication security.
In addition, AI at edge gateways reduces communication overhead and less communication results in an increase in data security.
Scalability
Vehicular edge computing inherently has a distributed architecture that can help bring data to the edge of networks, where vehicles can analyze and interact with the data in real time, as if it were local.
While the cloud is a necessity for certain tasks, autonomous cars require a more decentralized approach. For example, intelligent sensors can have the capability to analyze their own video feeds, determine which frames of a video require attention and send only that data to the server. This decentralized architecture reduces network latency during the data transfer process as data no longer has to traverse across the network to the cloud for immediate processing. AI vehicles are being equipped with more onboard computing power than in the past and can perform more tasks on their own. with higher predictability and less latency.
Cost
The increasing number of roadside units (RSUs) equipped with powerful local AI processors can help lower energy consumption, maintenance and operational costs as well as the associated high bandwidth cost of transferring data to the cloud. Meanwhile, one of the key drivers making edge computing a more viable reality today is that the cost of computing and sensors continues to plunge.
AI Automotive Processor Technology
The automotive industry is undergoing key technological transformations, advancing towards higher automation levels. Intelligent driving requires more efficient and powerful AI processors. According to Horizon Robotics’ summary of OEM demands, a higher level of automated driving requires more orders of magnitude tera operations per second (TOPS), namely, 2 TOPS for L2 autonomy, 24 TOPS for L3, 320 TOPS for L4 and 4,000+TOPS for L5.
Automotive processors typically fall into three broad categories:
Conventional CPUs and GPUs are struggling to meet the increasing demands of high computing requirements of L4 and L5 autonomous driving levels where FPGAs/ASICs are both outperforming CPUs/GPUs. Autonomous vehicles will need enough
computing power to become a “data center on wheels”. Taking the complexity of automotive applications into consideration, computing power alone is not enough. The energy efficiency, performance and cost-effectiveness of AI automotive processors should also be taken into consideration. Full-custom ASICs are by far superior to GPUs/FPGAs in terms of lower power consumption, performance and cost. That is why the integration of AI-specific ASIC accelerators in autonomous driving computing platforms is booming.
High-Performing Accelerator Chips
The inference accelerator chips of Gyrfalcon Technology, Inc (GTI) have a Convolutional Neural Network Domain-Specific Architecture (CNN-DSA) with a dedicated Matrix Processing Engine (MPE) and an efficient AI Processing in Memory (APiM) technology. As an example, GTI’s LightSpeeur 2803S provides a power efficiency performance of 24 TOPS/Watt with all CNN processing done in the internal memory instead of outside DRAM. It can classify 448×448 RGB image inputs at more than 16.8TOPS with a peak power consumption of less than 700mW and with an accuracy comparable to the VGG benchmark. Gyrfalcon’s CNN- DSA accelerators are reconfigurable to support CNN model coefficients of various layer sizes and layer types.
For more computationally-intensive edge computing applications such as in driverless-car AI platforms, GTI’s PCIe- based AI accelerator cards using 16x 2803S chips delivering 270 TOPS and 9.9 TOPS/W power efficiency can be used for Level 4 AI auto performance demand. Using 4x GTI 2803S PCIe cards (64 chips) can provide the top performance of 1080 TOPS for L5 AI auto performance and beyond.
GTI’s AI-based chips have a flexible and scalable architecture and can be easily arranged in either parallel or cascades for any given performance/model size application. Cascading capability provides flexibility and reduces the host workload. Cascading enables support for larger and more complex models (i.e. ResNet-101, ResNet-152, …).
The underlying function of many autonomous vehicle applications is deep-learning technology, such as convolutional neural networks (CNNs) that are typically used for vehicle and pedestrian detection, road surface tracking, sign and signal recognition, and voice-command interpretation. GTI’s AI-based architecture is “silicon-proven” standalone accelerator technology that can be used with any type of sensor output, such as visual, audio and other forms of data. This can include high data rates from machine learning cameras and high-resolution LiDAR as well as low data rates from RADAR and ultrasonic sensors.
___________________________________________
About Manouchehr Rafie, Ph.D.
Dr. Rafie is the Vice President of Advanced Technologies at Gyrfalcon Technology Inc. (GTI), where he is driving the company’s advanced technologies in the convergence of deep learning, AI Edge computing, and visual data analysis. He is also serving as the co-chair of the emerging Video Coding for Machines (VCM) at MPEG-VCM standards.
Edge AI Computing Advancements Driving Autonomous Vehicle Potential - GSA - Global Semiconductor Alliance
Written by Manouchehr Rafie, Ph.D. | CEO | Gryfalcon Large numbers of sensors, massive amounts of data, ever-increasing computing power, real-time operation and security […]
www.gsaglobal.org
EDGE AI COMPUTING ADVANCEMENTS DRIVING AUTONOMOUS VEHICLE POTENTIAL
Written by Manouchehr Rafie, Ph.D. | CEO | GryfalconLarge numbers of sensors, massive amounts of data, ever-increasing computing power, real-time operation and security concerns required for autonomous vehicles are driving the core of computation from the cloud to the edge of the network. Autonomous vehicles are constantly sensing and sending data on road conditions, location and the surrounding vehicles. Self-driving cars generate roughly 1 GB of data per second – it is impractical to send even a fraction of the terabytes of data for analysis to a centralized server because of the processing bandwidth and latency.
Due to the high volume of data transfer, latency issues and security, the current cloud computing service architecture hinders the vision of providing real-time artificial intelligence processing for driverless cars. Thus, deep learning, as the main representative of artificial intelligence, can be integrated into edge computing frameworks. Edge AI computing addresses latency-sensitive monitoring such as object tracking and detection, location-awareness, as well as privacy protection challenges faced in the cloud computing paradigm.
The real value of edge AI computing can only be realized if the collected data can be processed locally and decisions and predictions can be made in real-time with no reliance on remote resources. This can only happen if the edge computing platforms can host pre-trained deep learning models and have the computational resources to perform real-time inferencing locally. Latency and locality are key factors at the edge since data transport latencies and upstream service interruptions are intolerable and raise safety concerns (ISO26262) for driverless cars. As an example, the camera sensors on a vehicle should be able to detect and recognize its surrounding environment without relying on computational resources in the cloud within 3ms and with high reliability (99.9999%). For a vehicle with 120 km/h speed, 1ms round-trip latency corresponds to 3 cm between a vehicle and a static object or 6 cm between two moving vehicles.
Currently, most existing onboard AI computing tasks for autonomous vehicle applications including object detection, segmentation, road surface tracking, sign and signal recognition are mainly relying on general-purpose hardware – CPUs, GPUs, FPGAs or generic processors. However, power consumption, speed, accuracy, memory footprint, die size and BOM cost should all be taken into consideration for autonomous driving and embedded applications. High power consumption of GPUs magnified by the cooling load to meet the thermal constraints, can significantly degrade the driving range and fuel efficiency of the vehicle. Fancy packaging, fan-cooling, and general-purpose implementations have to go. Therefore, there is a need for cheaper, more power-efficient, and optimized AI accelerator chips such as domain-specific AI-based inference ASIC as a practical solution for accelerating deep learning inferences at the edge.
Advantages of Edge computing for AI automotive
Significant efforts have been recently spent on improving vehicle safety and efficiency. Advances in vehicular communication and 5G vehicle to everything (V2X) can now provide reliable communication links between vehicles and infrastructure networks (V2I). Edge computing is most suitable for bandwidth-intensive and latency-sensitive applications such as driverless cars where immediate action and reaction are required for safety reasons.
Autonomous driving systems are extremely complex; they tightly integrate many technologies, including sensing, localization, perception, decision making, as well as the smooth interactions with cloud platforms for high-definition (HD) map generation and data storage. These complexities impose numerous challenges for the design of autonomous driving edge computing systems.
Vehicular edge computing (VEC) systems need to process an enormous amount of data in real time. Since VEC systems are mobile, they often have very strict energy consumption restrictions. Thus, it is imperative to deliver sufficient computing power with reasonable energy consumption, to guarantee the safety of autonomous vehicles, even at high speed.
The overarching challenge of designing an edge computing ecosystem for autonomous vehicles is to deliver real-time processing, enough computing power, reliability, scalability, cost and security to ensure the safety and quality of the user experience of the autonomous vehicles.
Low Latency
Zero (low) latency for automotive safety is a must. Many of the self-driving car makers are envisioning that sensor data will flow up into the cloud for further data processing, deep learning, training and analysis required for their self-driving cars. This allows automakers to collect tons of driving data and be able to use machine learning to improve AIself-driving practices and learning. Estimates suggest that sending data back-and-forth across a network would take at least 150-200ms. This is a huge amount of time, given that the car is in motion and that real-time decisions need to be made about the control of the car.
According to Toyota, the amount of data transmitted between cars and the cloud could reach 10 exabytes a month by 2025. That’s 10,000 times the current amount. The cloud wasn’t designed to process massive amounts of data quickly enough for autonomous cars.
The self-driving car will be doing time-sensitive processing tasks such as lane tracking, traffic monitoring, object detection or semantic segmentation at the local (edge) level in real-time and taking driving actions accordingly. Meanwhile for longer-term tasks, it is sending the sensor data up to the cloud for data processing and eventually sending the analysis result back down to the self-driving car.
Edge computing technology will thus provide an end-to-end system architecture framework used to distribute computation processes to localized networks. A well-designed AI self-driving and connected car will be a collaborative edge-cloud computing system, efficient video/image processing, and multi-layer distributed (5G) network – a mixture of localized and cloud processing. Edge AI computing is meant to complement the cloud, not completely replace it.
Speed
Given the massive volume of data transmitting back-and-forth over a network, for safety reasons, much of the processing has to occur onboard the vehicle. The speed at which the vehicle needs to compute continuous data, without the need to transfer data, will help reduce latency and increase accuracy due to a reliance on connectivity and data transfer speeds.
The interdependency between humans and machines means the velocity of information transfer in real-time is essential. Using edge AI computing involves having enough localized computational processing and memory capacities to be able to ensure that the self-driving car and the AI processor can perform their needed tasks.
Reliability
The safety of autonomous cars is critical. Edge computing reduces the strain on clogged cloud networks and provides better reliability by reducing the lag between data processing and the vehicle. It didn’t take long for autonomous vehicle manufacturers to realize the limitations of the cloud. While the cloud is a necessity, autonomous cars require a more decentralized approach.
With edge computing and edge data centers positioned closer to vehicles, there is less chance of a network problem in a distant location affecting the local vehicles. Even in the event of a nearby data center outage, onboard intelligent edge inferencing of autonomous vehicles will continue to operate effectively on their own because they handle vital processing functions natively.
Today, automakers provide multiple layers of protection and redundancy for power failure, network failure and even compute failure. Vehicles also have the ability to dynamically re-route and power network traffic and even decision-making to bring an autonomous car to a safe stop. Driverless cars with edge AI computing can support onboard diagnostics with predictive analytics, a system that can grow and evolve in features over its lifecycle.
With so many edge computing vehicles connected to the network, data can be rerouted through multiple pathways to ensure vehicles retain access to the information they need. Effectively incorporating Internet of Vehicles (IoV) and edge computing into a comprehensive distributed edge architecture providing unparalleled reliability and availability.
Security
The ultimate challenge of designing an edge computing ecosystem for autonomous vehicles is to deliver enough computing power, redundancy, and security to guarantee the safety of autonomous vehicles. Thus, protecting autonomous driving
edge computing systems against attacks at different layers of the sensing and computing stack is of paramount concern.
Security of autonomous vehicles should cover different layers of the autonomous driving edge computing stack. These securities include sensor security, operating system security, control system security, and communication security.
In addition, AI at edge gateways reduces communication overhead and less communication results in an increase in data security.
Scalability
Vehicular edge computing inherently has a distributed architecture that can help bring data to the edge of networks, where vehicles can analyze and interact with the data in real time, as if it were local.
While the cloud is a necessity for certain tasks, autonomous cars require a more decentralized approach. For example, intelligent sensors can have the capability to analyze their own video feeds, determine which frames of a video require attention and send only that data to the server. This decentralized architecture reduces network latency during the data transfer process as data no longer has to traverse across the network to the cloud for immediate processing. AI vehicles are being equipped with more onboard computing power than in the past and can perform more tasks on their own. with higher predictability and less latency.
Cost
The increasing number of roadside units (RSUs) equipped with powerful local AI processors can help lower energy consumption, maintenance and operational costs as well as the associated high bandwidth cost of transferring data to the cloud. Meanwhile, one of the key drivers making edge computing a more viable reality today is that the cost of computing and sensors continues to plunge.
AI Automotive Processor Technology
The automotive industry is undergoing key technological transformations, advancing towards higher automation levels. Intelligent driving requires more efficient and powerful AI processors. According to Horizon Robotics’ summary of OEM demands, a higher level of automated driving requires more orders of magnitude tera operations per second (TOPS), namely, 2 TOPS for L2 autonomy, 24 TOPS for L3, 320 TOPS for L4 and 4,000+TOPS for L5.
Automotive processors typically fall into three broad categories:
- CPU and GPU-based processors: tend to have good flexibility but generally consume more power
- FPGAsrequires less computational resources, but more costly and limited programmability compared to GPUs
- ASICs: usually with a custom design, are more efficient in terms of performance, cost and power consumption
Conventional CPUs and GPUs are struggling to meet the increasing demands of high computing requirements of L4 and L5 autonomous driving levels where FPGAs/ASICs are both outperforming CPUs/GPUs. Autonomous vehicles will need enough
computing power to become a “data center on wheels”. Taking the complexity of automotive applications into consideration, computing power alone is not enough. The energy efficiency, performance and cost-effectiveness of AI automotive processors should also be taken into consideration. Full-custom ASICs are by far superior to GPUs/FPGAs in terms of lower power consumption, performance and cost. That is why the integration of AI-specific ASIC accelerators in autonomous driving computing platforms is booming.
High-Performing Accelerator Chips
The inference accelerator chips of Gyrfalcon Technology, Inc (GTI) have a Convolutional Neural Network Domain-Specific Architecture (CNN-DSA) with a dedicated Matrix Processing Engine (MPE) and an efficient AI Processing in Memory (APiM) technology. As an example, GTI’s LightSpeeur 2803S provides a power efficiency performance of 24 TOPS/Watt with all CNN processing done in the internal memory instead of outside DRAM. It can classify 448×448 RGB image inputs at more than 16.8TOPS with a peak power consumption of less than 700mW and with an accuracy comparable to the VGG benchmark. Gyrfalcon’s CNN- DSA accelerators are reconfigurable to support CNN model coefficients of various layer sizes and layer types.
For more computationally-intensive edge computing applications such as in driverless-car AI platforms, GTI’s PCIe- based AI accelerator cards using 16x 2803S chips delivering 270 TOPS and 9.9 TOPS/W power efficiency can be used for Level 4 AI auto performance demand. Using 4x GTI 2803S PCIe cards (64 chips) can provide the top performance of 1080 TOPS for L5 AI auto performance and beyond.
GTI’s AI-based chips have a flexible and scalable architecture and can be easily arranged in either parallel or cascades for any given performance/model size application. Cascading capability provides flexibility and reduces the host workload. Cascading enables support for larger and more complex models (i.e. ResNet-101, ResNet-152, …).
___________________________________________
About Manouchehr Rafie, Ph.D.
Dr. Rafie is the Vice President of Advanced Technologies at Gyrfalcon Technology Inc. (GTI), where he is driving the company’s advanced technologies in the convergence of deep learning, AI Edge computing, and visual data analysis. He is also serving as the co-chair of the emerging Video Coding for Machines (VCM) at MPEG-VCM standards.
Fact Finder
Top 20
Just found this NASA Ames research from 2013. Might be dreaming but it seems they have been waiting for AKIDA:
If I am correct having disclosed this you may never hear from me again. LOL
My opinion only DYOR
FF
AKIDA BALLISTA
If I am correct having disclosed this you may never hear from me again. LOL
My opinion only DYOR
FF
AKIDA BALLISTA
Just looked up who Hesai is... A Chinese headquartered Lidar solution that looks very very refined and ready to go/ be implemented
I've never heard of them before today, (I'd never heard of Renasas before BRN's announcement either) so there definitely is a lot i haven't heard of in this space and I'm learning as much as i can while digging for potential links.
wouldn't it be amazing if there is some form of relationship there.. my research only has found that Hesai have a strong link with Bosch....that's all I could find..
this is their flagship LiDar solution.. looks very very clean
apologies if someone else has posted any of this.
what did that BRN Chinese patent cover? i forget.........i need to go back and check and refresh my memory...does anyone have a link?
where's barrelsitter when i need a patent link?
(Update:- Found it!.. unfortunately unrelated https://patentscope.wipo.int/search/en/detail.jsf?docId=CN300207319&_fid=CN340388445 )
Last edited:
Similar threads
